1. Updated ViewComponent to exposes similar properties to the existing ones in controller where
appropiate. We've left out Resolver for being a bad pattern (just inject the dependency on the constructor
or use Context.RequestServices to access it if needed) and Response as although available through the Context
property, it shouldn't be used/modified in a ViewComponent.
2. Updated ViewViewComponentResult to follow a similar pattern as ViewResult where the constructor is
parameterless and elements like ViewEngine are resolved during execution if the user does not set the
associated property on the object.
3. Updated ExecuteAsync in JsonViewComponentResult to remove the unnecessary pragma and async keyword from the
signature and to use Task.FromResult(true) instead.
4. Cleaned up ViewViewComponentResult tests.
Right now these use a commandline adapter to inject some data into the
tests, but it's really not needed. Instead, these routes use a prefix to
ensure that the scenario under test is isolated.
- #EngineeringDay
- license present but incorrect in just a few files
- skip generated files such as Resources.Designer.cs and files under
test\Microsoft.AspNet.Mvc.Razor.Host.Test\TestFiles\Output
- #EngineeringDay
- VS does not yet format auto-properties nicely; reverted what it did
Also revert changes under
- test/Microsoft.AspNet.Mvc.Razor.Host.Test/TestFiles
- #EngineeringDay
- Total replaced: 660 Matching files: 270 in *.cs
- Total replaced: 250 Matching files: 32 in all other files
- Total replaced: 22 Matching files: 8 in a few stragglers
Did not change files under following directories
- test\Microsoft.AspNet.Mvc.Razor.Host.Test\TestFiles\Output
- test\Microsoft.AspNet.Mvc.FunctionalTests\compiler\resources
- test\WebSites\TagHelpersWebSite
(Razor generates trailing whitespace in a case or two)
For each of these TODOs:
- If there's an active bug tracking the work, and the TODO provides
something of value, I left it and standardized the formatting. I also
added comments to the bug.
- If the comment provided no value (implement feature X when we do feature
X), I deleted it with impunity.
- If the comment was stale (won't fix or just out of date), then we
removed it uncerimoniously.
There was a single TODO that was actually actionable, so I enabled that
test.
- TagHelperAttributeDescriptors changed to be lighterweight and not depend on PropertyInfo, had to modify our use of them to work with the new contract.
- scenarios where helper takes different code paths were not well-explored
nits:
- improve a few comments and names
- refactor some setup code into helper methods
- use `EmptyModelMetadataProvider`, not `DataAnnotationsModelMetadataProvider`
Test gap around `GenerateTextBox()`'s `format` argument is temporary.
- #1523
- remove `TagHelperOutput.Merge()` extension method entirely
- test tag name preservation with all MVC tag helpers
- `<input/>` tag helper generation of a checkbox wasn't previously tested
nits:
- fix argument order in a couple of `Assert.Equal()` calls
- remove use of "original tag name"
This change enables some compatibility scenarios with MVC 5 by expanding
the set of legal ways to configure attribute routing. Most promiently, the
following example is now legal:
[HttpPost]
[Route("Products")]
public void MyAction() { }
This will define a single action that accepts POST on route "Products".
See the comments in #1194 for a more detailed description of what changed
with more examples.
These tests verify that per-request services can be injected into assets
that users provide/implements (filters, constraints, controllers, views,
etc).
The purpose is to verify that the services are correctly resolved from the
per-request service container, and don't have state that lingers and
influences the next request. This is important because changing the
lifetime of a framework services could easily impact the lifetimes of
others, and ultimately of something the user created.
Rather than throwing here, this does what routing does. If request
services aren't set, we just create our own scope.
This will NOT create an extra scope if request services are already set.
- clean up "the the" in XML comments
- simplify refactoring VS did when I renamed `GetHtmlHelperForViewData()`
- fix existing issue in `HtmlHelperCheckboxTest.CheckBoxReplacesUnderscoresInHtmlAttributesWithDashes()`
(was using a `HtmlHelper<ViewDataDictionary<TestModel>>`)
- add missing license headers
- make "post" more obvious
- use `Assert.IsAssignableFrom()`
nit: remove unused `using`s in `HtmlHelperLinkGenerationTest`
- helps w/ #453 since `Html.BeginForm()` wasn't previously tested
- provide a `DefaultTemplatesUtilities.GetHtmlHelper()` overload with an
`IHtmlGenerator` parameter
- update `DefaultTemplateUtilities` to use `DefaultHttpContext`
- stop using a mock for this purpose; provides a non-`null` `Request`
nit:
- `DefaultTemplatesUtilities.GetHtmlHelperForViewData()` -> `...GetHtmlHelper()`
for consistency with other overloads
This is the MVC companion to https://github.com/aspnet/Routing/pull/122
As routing flows, routes replace the route data and mutate a copy. This
allows users to make changes that dirty the data without affecting
undesired state changes.
We also add the 'next' router for diagnostic purposes.
- value may remain in the `FormContext` beyond `</select>` end tag but will
be cleaned up at the `</form>` end tag of the containing `<form/>` element
- `SelectTagHelper` called prior to helpers for contained `<option/>`s and
not again later
- adjust mock setups to handle new `GenerateSelect()` call
- add assertions for expected `FormContext.FormData` entry
nit: mention #1468 in a test comment
- use new `ModelMetadata.HtmlEncode` property in HTML helpers
- specifically in default HTML display and editor object templates (e.g.
`@Html.DisplayFor()`) when value is non-`null` and the template is invoked
with template depth greater than 1
- similar to MVC 5.2 commit [2b12791aee4f](https://aspnetwebstack.codeplex.com/SourceControl/changeset/2b12791aee4ffc56c7928b623bb45ee425813021)
nits:
- remove dupe `null` check in `DefaultDisplayTemplates.ObjectTemplate()`
- move backing fields initialized with constants together in `ModelMetadata`
The change here is to always use the provided formatter, instead of using
it as a fallback. This is much less surprising for users.
There are some other subtle changes here and cleanup of the tests, as well
as documentation additions.
The primary change is that we still want to run 'select' on a formatter
even if it's the only one. This allows us to choose a content type based
on the accept header.
In the case of a user-provided formatter, we'll try to honor the best
possible combination of Accept and specified ContentTypes (specified
ContentTypes win if there's a conflict). If nothing works, we'll still run
the user-provided formatter and let it decide what to do.
In the case of the default (formatters from options) we do conneg, and if
there's a conflict, fall back to a global (from services)
JsonOutputFormatter - we let it decide what to do.
This should leave us with a defined and tested behavior for all cases.
- ensure `ViewDataDictionary` constructors are not passed a `null` or
`Mock.Of<IModelMetadataProvider>()` instance
- `ViewDataDictionary` constructors always use the `IModelMetadataProvider`
- `viewData.ModelMetadata` now never `null`
- `ViewDataDictionary<int>.Model` no longer throws if read before it's written
- `ViewDataDictionary.ModelMetadata` now copied to new instances in fewer cases
- e.g. don't use unusual `object` datatype with customized `ModelMetadata`
This change adds the concept of a full-name to viewcomponents. View
components can be invoked using either the short name or long name. If the
provided string contains a '.' character, then it will be compared against
full names, otherwise it will be matched against short names only.
The short name is used for view lookups.
If the name is explicitly set via ViewComponent attribute, then the full
name is the name provided. The short name is the portion of the name after
the last '.'. If there are no dots, then the short name and full name are
the same.
If the name is not set explicitly, then it is inferred from the Type and
namespace name. The short name is the Type name, minus the 'ViewComponent'
suffix (if present). The full name is the namespace of the defining class,
plus the short name.
Taking the suggestion here to move these to a sub-object. This is future
proof in the event that we need to capture more data for ApiExplorer, and
reads better.
ViewComponents and Controllers now follow the same rules exactly for what
types of classes they can be.
Also corrected a bug in a test for controllers. Closed-generic types can
be controllers, the test was wrong.
- Cleaned up some existing bad code that worked around case sensitive TagHelperOutput.Attributes.
- Modified MergeAttributes to be case insensitive when it comes to merging class attributes.
- Added a test to verify the new MergeAttribute case insensitive class merging.
aspnet/Razor#186
- This involved adding the StringComparer.OrdinalIgnoreCase comparer to the TagBuilder's Attributes dictionary.
- Added tests to validate that all methods that made use of TagBuilder.Attributes abide by the new ignore case mechanic.
- Added two sets of tests to validate the new functionality of Object => Dictionary HTML helper tests.
- Modified a functional test that utilizes HTML Helpers to provide same attribute-different case objects.
- Fixed existing HTML helper tests to account for new ordering of attrbutes (dictionary no longer adds key value pairs, it sets them).
#1328
This also comes with a rename of the namespace
Microsoft.AspNet.Mvc.ApplicationModel to
Microsoft.AspNet.Mvc.ApplicationModels.
Also tuned up some parameter and variable names for increased
understandability.
This change modifies the default parameter binding behavior for an
ApiController to use the WebAPI rules.
'simple types' default to use route data or query string
'complex types' default to use the body (formatters)
Adds ModelBindingAttribute to enabled model binding
- #704 part 2 of 2
- change `@Html.Id()` to sanitize return value; was identical to `@Html.Name()`
Copied `TagBuilder.CreateSanitizedId()` and `TagBuilder.Html401IdUtil` from MVC 5.2
- except this `CreateSanitizedId()` returns a valid identifier if first `char` is not a letter
- e.g. "[0].Name"
nits:
- expand variable names, use lots of `var`, put `public` members first
- add doc comments for `CreateSanitizedId()`
Note users will be able to apply different sanitization once we fix#1188.
- also make `TagHelperOutputExtensions.MergeAttributes()` case-insensitive
nits:
- deliniate attribute names in all resource strings
- update validation messages in TagHelperSample.Web
- Changed TagHelper property accessors from private to protected internal.
- Changed throw tests to be shorter.
- Changed reflection setting to now use the internal accessibility of the TagHelpers
- Removed activator to just use internal accessibility of TagHelpers.
- Changed new StringWriter() instances where we didn't need the StringWriter to be TextWriter.Null
- Added a TagHelper that targets the <a> tag and allows users to do the equivalent of Html.ActionLink or Html.RouteLink.
- Added tests to validate AnchorTagHelper functionality.
#1247
- Added the FormTagHelper.
- Utilized the IHtmlGenerator to share base functionality with the HTMLHelper counterparts.
- Added tests to validate FormTagHelper functionality.
#1246
- make a few more methods available as `internal static` in `DefaultHtmlGenerator`
- remove `IHtmlGenerator.GenerateOption()`; now `internal static`
nits:
- add `IHtmlGenerator.IdAttributeDotReplacement`
- move `DefaultHtmlGenerator.IdAttributeDotReplacement` after constructor
- move `HtmlHelper.ActionLink()` below static methods
- move newly-`internal` methods together in `DefaultHtmlGenerator`
- correct placement of `DefaultHtmlGenerator.GetValidationAttributes()` comment
- new Microsoft.AspNet.Mvc.TagHelpers.Test project
- bit of test infrastructure -- `TestableHtmlGenerator`
- short-curcuits validation attribute and AntiForgery additions
- should help when testing all MVC tag helpers
Fix: The MvcOptions takes in a list of ExcludeFromValidationDelegate (Func<Type,bool>). This func verifies if the type is excluded in validation or not.
- #965
- test call-throughs from `Html.Editor[For]()` to inner `IHtmlHelper`
- add another parameter to `DefaultTemplatesUtilities.GetHtmlHelper()`
nit: reorder dictionaries at the top of `TemplateRenderer` slightly
Fix: Using TypeConverter solves this problem.
-Issue #1123 - TypeConverterModelBinder cannot bind "byte" and "short".
Fix: Modified code to use TypeConverter which can handle these scenarios.
-Removing the GetConverterDelegate method and making the code similar to the WebApi.
1) Expose the simplified relative path template by cleaning up constraints, optional and catch all tokens from the template.
2) Expose the parameters on the route template as API parameters.
3) Combine parameters from the route and the action descriptor when the parameter doesn't come from the body. #886 will refine this.
4) Expose optionality and constraints for path parameters. Open question: Should we explicitly expose IsCatchAll?
Html.PartialAsync
* Introducing StringCollectionTextWriter to buffer the contents of
PartialAsync
* Ensure DecorateWriter is called for partial views
Fixes#1266
Adds the set of CreateResponse/CreateErrorResponse extension methods that
return an HttpResponseMessage.
For the overloads that perform content negotiation they will access the
collection of MediaTypeFormatters through the shim options. Note that
CreateResponse and friends use the OLD formatters.
Also, HttpError and CreateErrorResponse assume ErrorDetail == false. Using
the shim you will not get detailed error messages unless you construct the
HttpError instance yourself.
This change adds a ModelBinder that can bind an HttpRequestMessage to an
action parameter.
This builds on an earlier change to construct and store the request
message in the HttpContext via an http feature.
This change adds a .Request property to the ApiController class that can
be used to access an HttpRequestMessage wrapping the HttpContext.
The HttpRequestMessage is stored in an http feature to make it accessible
to model binders and other infrastructure.
This change adds ApplicationModel conventions that can enable WebAPI
action conventions (verb mapping) and WebAPI overloading.
The conventions activate when a controller has a marker attribute.
ApiController has this attribute, so any ported code will automatically
opt-in.
Also ported some old tests for action selection to our new functional test
framework.
Adds an options class, as well as a default options setup that will
configure the default set of formatters.
Currently most of what options needs to do is a placeholder, but it later
do things like add ApplicationModelConventions, filters, formatters, model
binders, etc. Those will be added in follow up items.
This change includes the basic properties that we're providing for
compatability as well as some functional tests and unit tests that verify
that ApiController can be a controller class.
- Exposed internals from Mvc.Razor.Host to Mvc.Razor.Test so it can use the MvcRazorHost override that takes the IFileSystem.
- Added end-to-end code generation tests for TagHelpers with ModelExpression properties.
#1241
- Added an end-to-end test that verifies all content behaviors, interactions and functionalities of tag helpers.
- Added some common user scenarios to verify that the system works how we expect.
#1116
- We now new up TagHelper's, requiring them to have parameterless constructors.
- Added test to validate throwing.
- Removed existing tests that expected the constructor injection behavior.
#1303
- The TagHelperActivator enables dependency injection via properties and allows access to the ViewContext.
- This replaces the ICanHasViewContext mechanism that we had in place before.
- Added tests and fixed up existing to work with new format for providing ViewContext.
#1258
- includes new `RazorPage<TModel>.CreateModelExpression<TValue>()` method
- #1240
nit:
- regenerating the resources reordered Microsoft.AspNet.Mvc.Core's Resources.designer.cs
- The CreateTagHelper method is responsible for creating and activating TagHelpers.
- Added the support for requesting the ViewContext.
- Added tests to validate the tag helper creation mechanism.
#1104
- RazorPage now has the ability to use writing scopes to control where things are written.
- This enables RazorPages to use these writing scopes with TagHelpers. TagHelpers use them to buffer attributes that have C# contained within them and to also buffer content of TagHelpers whos ContentBehavior is Modify.
- Added RazorPage tests to validate their functionality.
#1102
IActionConstraint follows a provider model similar to filters. The
attributes that go on actions/controllers can be simple metadata markers,
the 'real' constraint is provided by a set of configurable providers. In
general the simplest thing to do is to be both an
IActionConstraintMetadata and IActionConstraint, and then the default
provider will take care of you.
IActionConstraint now has stages based on the Order property. Each group
of constraints with the same Order will run together on the set of
actions. This process is repeated for each value of Order until we run out
of actions or run out of constraints.
The IActionConstraint interface is beefier than the equivalent in legacy
MVC. This is to support cooperative coding between sets of constraints
that know about each other. See the changes in the sample, which implement
webapi-style overloading.
- only affects an extreme corner case: user sets `metadata.EditFormatString` then reads
`metadata.DisplayFormatString`
- an extreme case because `EditFormatString` is normally set only when
`DisplayFormatString` is set and, if set, it's to the same value
- happened to see this while updating `CachedDataAnnotationsModelMetadata` for this PR
nit: an -> a in an adjacent XML comment in `CachedDataAnnotationsModelMetadata`
1) Implemented FilePathResult to efficiently return files from disk.
2) Implemented FileStreamResult to return content from a stream.
3) Implemented FileContentResult to return content from a byte array.
This change removes WebAPI-style method parameter overloading and the
automatic mapping of 'unnamed' actions based on method names. For all
practicaly purposes, this change restores the MVC5 behavior for action
selection.
WebAPI-style overloading will be brought back in the future via a set of
opt-in constructs.
This adds support for attributes which interact with reflected model.
These conventions are applied after all of our built-in constructs so that
you can see and modify the results.
to precompile razor pages.
This is limited to sites where the .cshtml are still deployed. It's
current purpose is to speed up startup. Deploying without the razor
files is a separate feature.
1. Support multiple [Http*] attributes on an action.
2. Support multiple [Route] attributes on a controller and on an action.
3. Support creating multiple attribute routes using [AcceptVerbs("...", Route = "...")]
4. Detect attribute routed actions during action discovery and return one action per [Http*],
[Route] or [AcceptVerbs] attribute found on the method when there is at least one valid attribute route.
5. Merge all the HTTP methods of [Http*] and [AcceptVerbs] attributes in a method during
action discovery when there are no valid attribute routes defined on the action.
6. Build one action descriptor per controller [Route] + action [Http*], [AcceptVerbs]
or [Route] combination in an action.
7. Disallow the use of attributes that do not implement IActionHttpMethodProvider and
IRouteTemplateProvider simultaneously in methods that define attribute routed
actions and throw an exception during startup.
8. Disallow mixing attribute routed and non attribute routed actions on the same method
and throw an exception during startup.
1. Changed attribute usage on RouteAttribute.
2. Added a test on action discovery to ensure that actions with [Route] get discovered as
attribute routed actions.
3. Added a test on reflected action descriptor provider to ensure that an action with [Route] on
the controller and [Route] on the action results in an action that allows any Http method.
1. Added tests that cover parameters in actions.
2. Added tests that cover building the reflected application model.
3. Added tests that cover attribute routed action constraints and default values.
4. Added tests that cover conventionally routed action constraints and default values.
5. Refactored and cleaned up ReflectedActionDescriptorProvider. All the refactors consist
of extracting blocks of code to separate methods to better display the flow when building
the action descriptors.
Substituted all instances of [MemberData("PropertyName")] for [MemberData(nameof(PropertyName))]
This change enables us to take advantage of IDE features like Navigate to source,
find all references, etc. When using Visual Studio.
1. Added support for Name in attribute routing. Name can be defined using [RouteAttribute]
and the different Http*Attributes, for example [HttpGet].
2. Names defined on actions always override names defined on the controller.
3. Actions with a non empty template don't inherit the name from the controller. The name
is only inherited from the controller when the action template is null or empty.
4. Multiple attribute routes with different templates and the same name are not allowed.
- focus on affect of `ModelMetadata.HasNonDefaultEditFormat` and
`IHtmlHelper.Html5DateRenderingMode`
- work through `TemplateRenderer` because individual templates only do
formatting in a few cases
- `DisplayFormatString` and `EditFormatString` now based on attributes
- `HasNonDefaultEditFormat` is new
- confirm `DataType` and `ScaffoldColumn` in `CachedDataAnnotationsMetadataAttributes`
- remove unused nested class `ModelWithReadOnlyProperty`
- remove unecessary nested classes `RangeAttribute` and `RequiredAttribute`
- use `Assert.NotEmpty()` and `Assert.Single()` where appropriate
1. Changed ReflectedActionDescriptorProvider to add RouteGroupConstraint only once
for non attribute routed actions.
2. Added tests to cover the scenario.
2. Cleaning up the IInputFormatter to the final version.
3. Updating the input formatters and the context to be compliant with the IInputFormatter interface.
4. Adding Functional Tests.
- Not cleaning up TempInputFormatterProvider.
Conflicts:
src/Microsoft.AspNet.Mvc.Core/Formatters/InputFormatter.cs
src/Microsoft.AspNet.Mvc.Core/Formatters/JsonInputFormatter.cs
src/Microsoft.AspNet.Mvc.Core/Formatters/TempInputFormatterProvider.cs
src/Microsoft.AspNet.Mvc.Core/Formatters/XmlDataContractSerializerInputFormatter.cs
src/Microsoft.AspNet.Mvc.Core/Formatters/XmlSerializerInputFormatter.cs
src/Microsoft.AspNet.Mvc.Core/Microsoft.AspNet.Mvc.Core.kproj
src/Microsoft.AspNet.Mvc.Core/ReflectedActionInvoker.cs
src/Microsoft.AspNet.Mvc.ModelBinding/Microsoft.AspNet.Mvc.ModelBinding.kproj
test/Microsoft.AspNet.Mvc.Core.Test/Microsoft.AspNet.Mvc.Core.Test.kproj
Conflicts:
src/Microsoft.AspNet.Mvc.Core/Microsoft.AspNet.Mvc.Core.kproj
src/Microsoft.AspNet.Mvc.HeaderValueAbstractions/Microsoft.AspNet.Mvc.HeaderValueAbstractions.kproj
src/Microsoft.AspNet.Mvc.ModelBinding/Microsoft.AspNet.Mvc.ModelBinding.kproj
src/Microsoft.AspNet.Mvc.ModelBinding/ValueProviders/FormValueProviderFactory.cs
test/Microsoft.AspNet.Mvc.Core.Test/Microsoft.AspNet.Mvc.Core.Test.kproj
test/Microsoft.AspNet.Mvc.ModelBinding.Test/Microsoft.AspNet.Mvc.ModelBinding.Test.kproj
Conflicts:
src/Microsoft.AspNet.Mvc.Core/Formatters/FormattingUtilities.cs
src/Microsoft.AspNet.Mvc.Core/Formatters/TempInputFormatterProvider.cs
1. Added an Order property to IRouteTemplateProvider, ReflectedAttributeRouteModel,
AttributeRouteInfo, AttributeRouteLinkGenerationEntry and AttributeRouteMatchingEntry.
2. Changed the implementation of AttributeRoute to take the order into account when routing
incomming requests and generating links.
3. Ensured a stable ordering of route entries with the same order and precedence for route
matching and link generation based on the template text.
4. Added tests to validate that the precedence gets respected in route matching and link generation.
5. Added tests to validate that the order gets respected in route matching and link generation.
6. Added tests to validate that the order gets respected over the precedence for route matching
and link generation.
7. Added tests to validate that routes with the same order and precedence expose a stable ordering
for route matching and link generation.
1. Unsealed the Http*Attributes so that they can be extended and customized.
2. Added the same constructors as HttpGet to the rest of the Http*Attributes.
3. Added unit tests to validate the implementations for the IActionHttpMethodProvider.
4. Added functional tests to cover extra attribute routing scenarios like a test for an
action with an HttpDeleteAttribute on it and action with AcceptVerbsAttribute and an
action with a custom HttpMergeAttribute implemented.
1. Added a new AttributeRouteInfo class to store all the information for
actions that are attribute routed.
2. Added a new ReflectedAttributeRouteModel class to store all the information
related to attribute routes in the ReflectedApplicationModel.
3. Refactored ReflectedControllerModel and ReflectedActionModel to use ReflectedAttributeRouteModel
instead of just the attribute route template.
4. Refactored ReflectedActionDescriptorProvider to use AttributeRouteInfo and ReflectedAttributeRouteModel
instead of just the route template.
5. Added a CombineReflectedAttributeRouteModel method in ReflectedAttributeRouteModel that handles
combining two ReflectedAttributeRouteModel instances.
6. Removed the AttributeRouteTemplate class and moved the methods for combining attribute routes to the
ReflectedAttributeRouteModel class.
7. Added unit tests for ReflectedActionModel and ReflectedControllerModel that
cover the usage of AttributeRouteInfo.
8. Added unit tests for CombineReflectedAttributeRouteModel.
-Checks for ModelType before processing.
-Ignores quotes in ByteArrayModelBinder.
-Unit,functional Tests.
-ModelStateError is set when Covert.FromBase64String(value) throws.
* This allows for injection of the property in cshtml files wthout running
in to compilation errors
* Make IUrlHelper a default injected service
Fixes#816
it into exception thrown
All values in Exception.Data need to be serializable which is not true for
the diagnostics. Removing this property since we can't pass it through.
* Update CompilationFailedException to include path of file being compiled
* Pass in path being compiled to Rolsyn.
* Adding doc comments for compilation pieces
Fixes#869
- #874 lines 3, 4, and 6
- correct `Value()` to treat a `null` expression name the same as `string.Empty`
- add missing `[NotNull]` attributes in `EditorExtensions` and for `GenerateIdFromName()`
- consistently pass `null` for default expression names to the helpers
- for example, from extension methods
- add test cases using `null` for expression name
nits:
- correct summary XML comment for `HtmlHelper` class
- use named parameters and prefer interface (not extension) methods in changed calls
- use `string.Empty` instead of `""` in a few tests
- fix problems at least with Roslyn compiler and VS IntelliSense or the Object Browser
- `<see langref="keyword"/>` generates nothing
- `<example>` at top level (outside `<summary>`) generates nothing
- curly braces don't become angle brackets outside `<see cref="reference"/>` references
- yeah, a point @yishaigalatzer asked about in a previous PR
- `<see href="reference"/>` is not valid
- correct some invalid use of angle brackets and remove useless empty elements
- correct unresolved XML comment references; generally, add namespace prefix
Symptoms for some of the above issues included
- generated XML comments such as `<!-- Badly formed XML comment ... -->`, usually indicating an unclosed element
- generated XML attributes such as `cref="!:..."`, indicating a broken reference
- in a couple of cases we had `<typeparamref cref="TOption"/>`; attribute should be `"name"`
Few wording changes beyond
- `"opening </form> tag"` -> `"<form> start tag"`
- `"closing </form> tag"` -> `"</form> end tag"`
Also correct two typos in `HtmlHelper`
Will create a unit test to ensure XML syntax doesn't degrade going forward. Separate PR.
- for now, check using `dir -r *.xml | sls '!'`
RazorTextWriter represents the result of rendering a page as a sequence of
strings rather than a concatenated string. This avoids building up large
strings in memory.
https://roslyn.codeplex.com/workitem/246 affects usage of code with the
latest build of Roslyn with Moq v4.2. The workaround involves ensuring a
closure is created. Updating affected tests to make ToString() calls on
local variables to create these closures.
This change consists of :
1. Conneg based on request headers, supports the following 3 scenarios:
a. ContentType property on ObjectResult set to null or is empty.
b. ContentType property on ObjectResult set to a single content type.
c. ContentType property on ObjectResult set to multiple content types.
2. Parsing Helpers, comparers and extensions for comparing various http headers.
3. Tests.
Open workitems:
1. Remodel JsonResult and ContentResult to be a derivation of ObjectResult.
2. Populate DeclaredType.
Conflicts:
src/Microsoft.AspNet.Mvc.Core/Formatters/OutputFormatterDescriptor.cs
src/Microsoft.AspNet.Mvc.Core/Microsoft.AspNet.Mvc.Core.kproj
src/Microsoft.AspNet.Mvc.Core/OptionDescriptors/OutputFormatterDescriptorExtensions.cs
src/Microsoft.AspNet.Mvc.Core/Properties/Resources.Designer.cs
src/Microsoft.AspNet.Mvc.Core/Resources.resx
src/Microsoft.AspNet.Mvc.HeaderValueAbstractions/MediaTypeHeaderValue.cs
src/Microsoft.AspNet.Mvc.HeaderValueAbstractions/MediaTypeWithQualityHeaderValue.cs
src/Microsoft.AspNet.Mvc/MvcOptionsSetup.cs
src/Microsoft.AspNet.Mvc/MvcServices.cs
test/Microsoft.AspNet.Mvc.Core.Test/Microsoft.AspNet.Mvc.Core.Test.kproj
test/Microsoft.AspNet.Mvc.Core.Test/OptionDescriptors/OutputFormatterDescriptorExtensionTest.cs
test/Microsoft.AspNet.Mvc.HeaderValueAbstractions.Test/MediaTypeHeaderValueParsingTests.cs
test/Microsoft.AspNet.Mvc.Test/MvcOptionSetupTest.cs
1. Added HttpNotFound() to Controller.
2. Updated HttpStatusCodeResult to expose the StatusCode as a property.
3. Added unit tests for HttpNotFound() and for HttpStatusCodeResult.
4. Updated the MvcSample to add an action that uses HttpNotFound().
5. Brought back HttpNotFoundResult and added unit tests for it.
For pages that can pop back (e.g. Partial pages \ View Components), the
invoking component already creates a new ViewContext. ViewStart, Pages
and Layouts need to share the same Layout. This is required for sharing
ViewData values (such as title).
Fixes#861
RazorView was part of the previous commit but was separated to make it
easier to see the diff in RazorPage that was formerly named RazorView
Adding IRazorPage and changes per code review comments
* Introducing RazorPage and RazorPageOfT that represent the Razor
execution aspect of view execution. Moving view execution hierarchy behavior
(Layout, partial views etc) into a separate RazorView type.
* Renaming IVirtualPathViewFactory to IRazorPageFactory,
IRazorViewActivator to IRazorPageActivator
* Renaming VirtualPathViewFactor to FileBasedPageFactory to
correctly reflect what it does.
Fixes#814
This change exludes internal and nested types from being treated as
controllers. This is consistent with MVC5's behavior.
DefaultActionSelectionConventions was primarily tested through running
action selection. I wanted to also test the methods with substantial logic
in this class, so I moved a spate of a classes from private classes inside of the
integration tests to public classes so they could be shared. I also added
tests to fill gaps in DefaultActionSelectionConventions, which is the vast
vast majority of this change.
* Removing Init method and using [Activate] to activate IUrlHelper.
* Moving IViewComponentHelper to default injected properties
* Adding functional tests to verify these properties are injected \
activated
Fixes#789
Move compilation and VirtualPathViewFactory to be singletons
And cache access to files.
The cache time is controlled by MVC options.
The cache is implemented in the ExpiringFileInfoCache.cs
This change allows a user to override a route prefix set using
[Route("...")] on the controller by providing a route template
on the action that starts with "~/" or "/". For example,
[HttpGet("~/...")] or [HttpGet("/...")]
If the user specifies a template in [Route] that starts with "~/"
or "/", we will just strip the prefix from the template and use
the remaining part of the template.
The reason to do this is that there's a reasonable extensibility
scenario where a user can implement a global prefix for routes as
a convention (using IReflectedApplicationModelConvention), and use
~/ to escape that prefix (just like we support with action-level routes).
- XML comments for changed `TemplateInfo` properties
- correct `DefaultDisplayTemplateTests` and `DefaultEditorTemplateTests` namespaces
- add a couple of low-level `TemplateInfo` tests
- add more `DefaultTemplatesUtilities.GetHtmlHelper()` overloads, all
returning a strongly-typed helper
- also correct that method to ensure template helpers each get a unique
`IHtmlHelper` instance
Additionally change it to use TypeExtensions.GetReadableProperties to get
property list. This causes it to ignore indexers which should not be
considered.
Fixes#595
Added very simple Autofac functional test that validates that we can add custom classes to the DI system as well as just use the ones provided to us.
#669
The issue here is actually different than described in the bug.
ResultFilter should only short circuit when .Cancel is set to true. This
is consistent with legacy MVC.
Added tests for all of this stuff. There's already good test coverage for
the invoker, what was missing was coverage for the attributes and for the
methods on Controller. ExceptionFilterAttribute and
AuthorizationFilterAttribute don't have short circuiting logic inside of
them, so they are already covered by tests for the invoker.
Pranav K
Praburaj
Ryan Nowak
Harsh Gupta
Yishai Galatzer
Ajay Bhargav Baaskaran
Victor Hurdugaci
Doug Bunting
Hao Kung
Kirthi Krishnamraju
N. Taylor Mullen
ianhong
kanchanm
Kiran Challa
SonjaKhan
sornaks
jacalvar
Stephen Halter
Murat Girgin
David Fowler
Wei Wang
Chris Ross
Louis DeJardin
Ben Brown
Tian Pan
Brice Lambson