This change adds tag helpers and defines event types for all of the DOM
events we could find. You'll find it much easier now to subcribe to
these events.
While we did define new event types, we didn't substantially expand the
set of data that we serialize for events. We're looking for feedback on
what is most critical to have, and looking for contributions adding
those data and tests.
* Stop the value<-->checked conversions for checkboxes. Just use native 'checked' property. Fixes#703
* Properly handle removal of 'checked' and 'value' attributes
* E2E coverage for removing 'value'
* Before refactoring ParameterCollection assignment logic, add more test coverage
* Begin caching parameter assignment info
* Factor out some reflection code to a reusable location
* Use IPropertySetter to avoid all per-property-assignment reflection
* More error cases and tests for parameter assignment
* Enable binding to nonpublic properties
* Add analyzer to warn and provide fix for public component parameters
* Unit test for analyzer
* Component tag helper now includes private properties if they have [Parameter]
* CR feedback: Remove garbage from csproj
* CR feedback: Rename .Build.Analyzers to .Analyzers
* CR feedback: Move BlazorApi.cs to shared; use it from Analyzers test
* Fix incorrect test name
* Make as many parameters private as possible. Replace ILayoutComponent with BlazorLayoutComponent.
* In component tag helper discovery, consider private members too
* Reduce the work in component parameter discovery by not inspecting the BlazorComponent base class (or System.Object)
This change introduces ParameterAttribute to specify a bindable
component parameter. As of the 0.3 release of Blazor we plan to make
[Parameter] required to make a property bindable by callers.
This also applies to parameters when their value is set by the
infrastructure, such as `Body` for layouts, and route paramters.
The rationale behind this change is that we think there is a need to
separate the definition of properties from their suitability for a
caller to set them through markup. We plan to introduce more features in
this area in the future such as marking parameters as required. This is
first step, and we think that this approach will scale nicely as we add
more functionaly.
The 0.3 release seems like the right time to change this behavior since
we're also introducing `ref` for captures in this release.
* Implement OnAfterRender and OnAfterRenderAsync
* Add E2E test combining OnAfterRender with "ref" and JS interop
... because this combination is the key to integration with 3rd-party JS
libs
This change adds `Action` to the set of types that have an overload on
RenderTreeBuilder. Additionally, we special case `Action` in the runtime
because passing the event args via DynamicInvoke() would throw.
Finally, reverted some of the clutter introduced by the first pass of
the event handler feature.
This change removes support for the old syntax used for event handlers
and two-way binding.
See the relevant issues for details on the new features and
improvements:
bind https://github.com/aspnet/Blazor/issues/409
event handlers https://github.com/aspnet/Blazor/issues/503
Along with this change we've removed a few additional things Blazor
could do that aren't part of Razor's usual syntax.
----
The features that was used to make something like:
```
<button @onclick(...) />
```
is an expression that's embedded in a an element's attribute. This
feature might be useful in the future if we want to support 'splatting'
arbitrary attributes into a tag, but the runtime support for this isn't
accessible outside the Blazor core.
----
The features that implement:
```
<button onclick=@{ } />
```
have been removed in favor of a better design for lambdas, method group
conversions and other things for event handler attributes.
use `<button onclick=@(x => ...} />` instead.
We think is a better approach in general, because we want the app
developer to write and see the parameter list.
----
Both syntactic features that have been removed have dedicated error
messages in the compiler. If you're porting old code it should help you
figure out what to do.
* Improve support for more types of event handlers
Improves support for for other types of event handlers with eventargs
types derived from UIEventArgs. Additionally fleshes out the set of
event handler types.
This change improves support for using more specific event handler types
like:
```
<button onclick="@Clicked" />
@functions {
public void Clicked(UIMouseEventArgs e) { ... }
}
```
And:
```
builder.AddAttribute(12, "onkeypressed", KeyPressed);
...
void KeyPressed(UIKeyboardEventArgs e) { ... }
```
In particular what got better is:
- overload resolution for the AddAttribute method
- performance of different cases for AddAttribute
-----
The runtime now treats delegates as one of three types:
- arbitrary delegate: not attached to DOM events, not tracked by
renderer
- UIEventHandler: can attach to DOM events, tracked by renderer, first
class in IHandleEvents
- UIEventHandler-like: can attach to DOM events, tracked by renderer,
requires some special runtime support.
The set of overloads on AddAttribute has been tuned with a few specific
cases in mind.
Lambda expressions in an attribute will be inferred as UIEventHandler
unless the compiler does something more specific. So for instance,
passing a lambda as an attribute value for a component, where the
component doesn't define a matching attribute, will always be inferred
as UIEventHandler.
We now support method-group to delegate conversion for methods that
accept a derived UIEventArgs type. This means you can use a signature
like `void KeyPressed(UIKeyboardEventArgs e)` without any compiler
magic, and this will work in the runtime as long as the event type
produced by the runtime matches.
We also allow user-defined UIEventArgs-derived types. There's a pattern
for this and it requires defining an extension method and delegate type.
The method-group to delegate conversion part required some doing. It
doesn't play well with generics (Action<T> where T : UIEventArgs)
doesn't work at all. Adding more actual overloads (as opposed to
extensions) would cause lambda cases we want to work to be ambiguous.
----
The performance win here is to remove the need for a 'wrapper' delegate
created by the event handler tag helper code. This wrapper is now
created by the runtime, but only *after* we have checked the frame for
changes. This requires more heavy lifting in the runtime, but has the
advantage of producing no-op diffs as often as possible.
You will still get some inefficient behavior if your component uses a
capturing lambda in an event handler, so don't do that.
* Add selenium logs to test output
* Minor feedback
* WIP
This change adds support for mapping DOM event handlers as tag helpers
that function in a bi-modal way.
This is a new first-class feature for DOM events, and replaces a few
workarounds like using `@onclick(...)` or `click=@{ ... }`. I haven't
removed those things yet, this is a first pass to get the new support
in, we'll remove those things when we're totally satisfied.
When used with a string like `<button onclick="foo" />` the result is
a simple HTML attribute .
But when used with an implicit expression like
`<button onclick="@Foo" />` or
`<button onclick="@(x => Clicked = true)" />` a C# function is bound to
the click event from the DOM.
This change introduces a 'tag helper' that replaces @bind with custom
code generation that accomplishes roughly the same thing.
This feature lights up by dynamically generating tag helpers that are
visible to tooling and affect the code generation based on:
- pattern recognition of component properties
- attributes that create definitions for elements
- a 'fallback' case for elements
'bind' also supports format strings (currently only for DateTime) via
a separate attribute.
This change introduces the basic framework for bind and tooling support.
We know that we'll have to do more work to define the set of default
'bind' cases for the DOM and to flesh out the conversion/formatting
infrastructure.
This change gets us far enough to replace all of the cases we currently
have tests for :) with the new features. The old @bind technique still
works for now.
Examples:
@* bind an input element to an expression *@
<input bind="@SelectedDate" format="mm/dd/yyyy" />
@functions {
public DateTime SelectedDate { get; set; }
}
@* bind an arbitrary expression to an arbitrary set of attributes *@
<div bind-myvalue-myevent="@SomeExpression">...</div>
@* write a component that supports bind *@
@* in Counter.cshtml *@
<div>...html omitted for brevity...</div>
@functions {
public int Value { get; set; } = 1;
public Action<int> ValueChanged { get; set; }
}
@* in another file *@
<Counter bind-Value="@CurrentValue" />
@functions {
public int CurrentValue { get; set; }
}
This isn't needed anymore to support the Blazor design-time experience.
Now that it's gone, it will no longer cause conflicts with MVC's types
so we can remove the other workaround (privateassets).
* Updates the router component to scan for components within assemblies.
* Parses the templates on `[Route]` in component instances and builds a
route table that maps paths to components.
* Uses the route table to map paths to components.
Adds the @page directive and support for specifying routes in components
at compile time.
For now the route is required and must begin with a leading /.
Ryan Nowak
Steve Sanderson
Ryan Nowak
Javier Calvarro Nelson
Florian Dohrendorf